Local emergency locksmiths serving Enfield, Enfield Lock, Brimsdown, Ponders End and surrounding areas.

🔵 Real Locksmiths. Real People. Real Jobs.

A customer on Old Road, Enfield EN3 contacted ASJ Locksmiths shortly before going on holiday after realising she had left her keys at work. Her packed suitcase and passport were still inside the property, while her mum, who held a spare set of keys, wasn't in the area.

When she called us, the customer initially asked us to gain access and change the lock.

After discussing the situation, we explained that a replacement lock wasn't necessary. The keys weren't lost or stolen, the customer knew exactly where they were, and another set of keys already existed.

Shaun and Jayden attended the property and gained access using non-destructive locksmith techniques, preserving the existing lock without causing damage.

The customer was then able to retrieve her suitcase and passport. Once she had everything she needed, the property was secured again using the existing lock.

No replacement lock was required and no unnecessary parts were fitted.

Although the customer had originally requested a lock change, correctly understanding what she actually needed meant we could provide a more appropriate solution and avoid an unnecessary replacement.

This genuine Enfield EN3 locksmith job is a good example of why professional locksmith work isn't always about fitting new parts. Sometimes the best result is preserving the existing lock and leaving the property secure.

Watch this genuine Old Road, Enfield EN3 locksmith job:

🎥 Facebook:
https://www.facebook.com/reel/4883826885172104

🎥 TikTok:
https://www.tiktok.com/@asjlocksmiths/video/7686622354725719318

🎥 YouTube:
https://www.youtube.com/shorts/MlOreSqix2s

The image to the left shows photographs from this genuine Old Road, Enfield EN3 lockout. Click the image to read the full job report.

Real Locksmiths. Real People. Real Jobs.

🔵 Real Locksmiths. Real People. Real Jobs.

A homeowner on Alberta Road, Enfield EN1 contacted ASJ Locksmiths after their key became stuck inside the front door lock.

The same problem had occurred approximately a week earlier, when another locksmith had attended and extracted the key. When the fault happened again, Shaun and Jayden attended to investigate why it was repeatedly occurring rather than simply treating the immediate problem.

The trapped key was carefully extracted without unnecessarily damaging the existing lock.

Once the key had been removed, Shaun and Jayden asked to inspect the other keys used for the property.

Comparing them revealed an important difference: the two keys regularly being used had become noticeably bent, while the spare key remained straight and undamaged.

Rather than assuming the cylinder was faulty, the undamaged spare key was tested repeatedly in the existing lock.

It operated correctly each time, confirming that the cylinder itself remained fully serviceable and that the damaged keys were causing the recurring problem.

There was nothing to suggest that replacing the cylinder would resolve the underlying issue.

The existing lock was operating correctly with the undamaged key, so replacing it would have meant charging the customer for a part they didn't need.

Instead, the homeowner was advised to stop using the damaged keys and have replacement keys professionally cut from the undamaged spare.

The customer was left with a fully functioning original lock and a clear understanding of what had been causing the repeated problem.

If a key repeatedly becomes difficult to insert, remove or turn, the problem isn't necessarily the lock.

Keys can become bent, worn or damaged through everyday use. Continuing to use a damaged key can result in it becoming stuck or eventually breaking inside the cylinder.

If you have an undamaged spare key that operates the lock correctly, this can also provide useful information when diagnosing whether the problem is with the key or the lock itself.

By investigating the cause of the repeated fault rather than automatically recommending a replacement lock, Shaun and Jayden preserved the customer's existing cylinder and avoided an unnecessary replacement.

If you're having problems with a key sticking in your lock or need a locksmith in Enfield, ASJ Locksmiths provides professional lock repairs, key extraction and locksmith services throughout Enfield, Enfield Lock, Brimsdown, Ponders End and surrounding areas.

📞 07476 464828

🔵 Real Locksmiths. Real People. Real Jobs.

A daughter and her mother's carer contacted ASJ Locksmiths after the carer accidentally snapped the front door key while trying to unlock a property on Southbury Road, Enfield EN1.

Part of the broken key remained lodged inside the cylinder, leaving them locked outside while the homeowner, who was bedbound, remained inside the property. Their immediate priority was to regain access as quickly and safely as possible so they could check on her.

Following an initial inspection, Shaun and Jayden established that the lock itself was unlikely to be at fault. The broken section of key trapped inside the cylinder was preventing another key from being inserted and stopping the lock from operating correctly.

Rather than immediately replacing the cylinder, Shaun and Jayden concentrated on removing the obstruction while preserving the existing lock.

The broken key was successfully extracted without damaging the cylinder, allowing the daughter's key to be inserted and the lock to be thoroughly tested.

The cylinder operated correctly, confirming that the lock itself had not been damaged and replacement was unnecessary.

Once access had been restored, the daughter and carer were able to immediately check on the homeowner. The property could then be secured normally, the original lock remained in service and the family could continue using their existing keys without the expense of an unnecessary lock replacement.

The inspection confirmed that the cylinder itself remained fully serviceable. The only issue preventing it from operating was the broken section of key trapped inside.

By diagnosing the fault before recommending replacement, the existing lock could be retained and unnecessary costs avoided.

If a key snaps inside your lock, avoid repeatedly trying to insert another key or forcing the broken section further into the cylinder.

Depending on the lock and circumstances, a broken key can often be professionally extracted without replacing the entire lock.

By accurately diagnosing the problem, successfully extracting the broken key and confirming the existing cylinder remained fully operational, Shaun and Jayden restored access while preserving the customer's original lock.

If you've snapped a key in your lock, been locked out or need a locksmith in Enfield, ASJ Locksmiths provides professional broken-key extraction and emergency locksmith services throughout Enfield, Enfield Lock, Brimsdown, Ponders End and surrounding areas.

📞 07476 464828

 🔵 Real Locksmiths. Real People. Real Jobs.

Shaun and Jayden attended a property on Chestnut Road, Enfield EN3 after a failed multipoint locking mechanism left the homeowner unable to open their UPVC back door.

The homeowner had already attempted to remove the door handle before contacting ASJ Locksmiths but had been unable to regain access.

Following an initial assessment, Shaun and Jayden established that non-destructive entry was appropriate. Access was successfully gained without damaging the existing lock, door or surrounding hardware.

Once the door was open, a full inspection confirmed that the multipoint locking mechanism had failed completely and required replacement.

The correct replacement mechanism was not immediately available. Multipoint locking mechanisms come in numerous sizes and configurations, so fitting an incorrect mechanism simply to complete the job immediately would not have been the right solution.

Instead, Shaun and Jayden installed a temporary gearbox and handles, restoring use of the door and allowing the property to remain secure while the correct replacement mechanism was sourced.

They then returned with the correct multipoint locking mechanism, removed the temporary components and completed the permanent repair.

The original door furniture was reinstated where appropriate, and the completed repair was thoroughly tested to ensure the door opened, closed, locked and unlocked correctly before the job was finished.

Multipoint locking mechanisms are manufactured in many different sizes and configurations.

Correctly identifying the failed mechanism before ordering a replacement helps ensure the appropriate part is fitted without unnecessary modifications or compromising the operation of the door.

In this case, the temporary repair meant the homeowner could continue using and securing the property while the correct permanent replacement was obtained.

If a UPVC or composite door becomes increasingly difficult to lock, the handle feels unusually stiff or the locking mechanism stops operating correctly, avoid repeatedly forcing it.

These symptoms can indicate a problem with the multipoint locking system. Having the fault properly diagnosed can help establish whether an adjustment, repair or replacement component is actually required.

By gaining access non-destructively, accurately identifying the failed mechanism, providing a temporary solution and returning with the correct replacement, Shaun and Jayden restored the door to full working order while keeping the property secure throughout the repair.

If you have a failed UPVC door mechanism, are locked out or need an emergency locksmith in Enfield, ASJ Locksmiths provides 24/7 locksmith and UPVC door repair services throughout Enfield, Enfield Lock, Brimsdown, Ponders End and surrounding areas.

📞 07476 464828

🎥 Watch the genuine ASJ repair video:
https://www.youtube.com/shorts/CXOvBu2fgCI